Sunday, 18 June 2017

The Shearing Shed Lives

Click on the photos to enlarge if you'd like to see more detail.

The shearing shed had seen better years. The old clear sections of roof had perished and let the rain in, and the floor was rotting out. Even sections of the wall framing and roof structure were starting to rot. Once the skylights were replaced with new laserlite and the remaining tin screwed back down, we could start on the insides. Leigh Farrell did the heavy lifting on this stage.


The floor was too dangerous to walk on and the support beams were crumbling away.


First job was to remove all the old floor and beams. This was accomplished with the use of a chainsaw ! We cut the floor slats between the beams to about a foot long (and provided Trina with a years worth of seasoned hardwood kindling) and removed all the old wood structure.


A happy find was that under the foot of dirt the shed base had originally been concreted, sloped with a drain. We shoveled out all the "compost" and filled garden beds with it, and cleaned the underfloor right up so the drainage could work.


A second happy find was that the bearers were railway iron. A little rusted but still plenty of the core remaining so that we could just place new beams across them. The rotted roof supports and wall framing were also replaced.


New hardwood slats were then nailed across the beams. The gaps are to allow waste to drop down between them when the sheep are held here for shearing. It can then be hosed out using the drain to take it out the back of the shed.


We were able to use if for shearing in November. There are still a couple of tweaks for optimum usefulness. We need a big sheet of heavy duty lino for the shearer to work on, as wool catches on new hardwood slats when you try to turn them. It will take a few years for them to wear smooth. And we need to set up the new catching pens. It's easier on everyone not to have to chase them round a big area.


During the process the old louvers were taken out because they had a habit of vibrating out of the frames in windy weather and shattering on the ground. Matt Cassidy made new laserlite hopper windows that let in light, keep out the wind and can be opened when needed for ventilation.


He also fixed the little loading door, allowing a ute to be backed up to the shed and sheep loaded directly into the shed if we choose to host other people's sheep for a shearing day. That way off-site sheep never need set hoof on our pastures.




3 comments: